#Zebra gx430t change font serial#
#Zebra gx430t change font code#

This document might not list all available printer models. Note: Therefore, there are no guarantees that the information on any particular printer model is correct.

In some cases, information on a particular printer model is based solely on what has been shown to work with other similar printer models. Information in this document has been gathered from many different sources, including printer manuals, manufacturer and third-party Web sites, and experience gathered from working with customers. Printers are listed in this document because they are known to exist therefore, being listed is not a statement that the printer model is supported. It also indicates whether each printer model is likely to work when printing from a System i using LPR, PJL, SNMP, IPP, or a PC5250 printer session. This document contains information on the capabilities that are supported on the printer hardware. If the writer fails, the error messages in the writer joblog will help to determine the cause. If the LPR/LPD printer has an IBM or Epson emulation mode:Д¬NNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(Based on the emulation: *IBM42011 -OR- *EPFX850) INTNETADR('x.x.x.x') DESTOPT(XAIX) SEPPAGE(*NO) If the paper is not pulling from the expected drawer, try using MFRTYPMDL *HP5SI or *HP4000.ДЇor a LAN attached continuous forms printer that supports LPR/LPD (usually a line printer or one that uses it's own printer language, such as Zebra (ZPL)):Д¬RTOUTQ OUTQ(QUSRSYS/OutputQueueName) RMTSYS(*INTNETADR) RMTPRTQ(RAW) AUTOSTRWTR(1)Д¬NNTYPE(*IP) DESTTYPE(*OTHER) TRANSFORM(*YES) MFRTYPMDL(*WSCST) WSCST(QWPDEFAULT) TRANSFORM(*YES) MFRTYPMDL(*HP4) RMTLOCNAME('x.x.x.x') SYSDRVPGM(*IBMSNMPDRV) ONLINE(*YES) FONT(11) FORMFEED(*CONT) PRTERRMSG(*INFO) INACTTMR(*SEC15) TRANSFORM(*YES) MFRTYPMDL(*HP4) RMTLOCNAME('x.x.x.x') SYSDRVPGM(*IBMSNMPDRV -or- *HPPJLDRV)ДЇor a LAN attached continuous forms printer that is SNMP capable: ONLINE(*YES) FONT(11) FORMFEED(*AUTOCUT) PRTERRMSG(*INFO) INACTTMR(*SEC15) **Where x.x.x.x is the printer's IP addressДЇor a LAN attached printer that has drawers:Д¬RTDEVPRT DEVD(PrinterName) DEVCLS(*LAN) TYPE(3812) MODEL(1) LANATTACH(*IP) PORT(9100) Most printers that support LPD will accept communication over port 515 regardless of whether the correct remote printer queue value is used. Most PCL printers use port 9100 and regardless of the hardware, a PCL Manufacturer Type and Model, such as *HP4, *HP5SI, *HP4000, etc.

Or, create a printer configuration and see if it works. Supported Network Protocols to see if TCP/IP LPR/LPD, Port 9100, IPP, or SNMP is listed.

Refer to the printer hardware documentation or visit the printer manufacturer's website to locate the printer's specifications to make the determination if it will work with the IBM i.Д®mulation or Printer Languages, or search on PCL. This document is updated on an as needed basis. IBM support does not actively search for information about new or different printers. This document is not updated on a regular basis. N1019698: Printer Model Settings for Host Print Transform (HPT) N1019605: Information on Printers from Various Manufacturers

It also indicates whether each printer model is likely to work when printing from the IBM System i products using LPR, PJL, SNMP, IPP, or a PC5250 printer session.ДЇor information on printers from other manufacturers, please refer to the following documents: Optional: 8 MB (12 MB total) Flash with RTC)Д§.6W x 7.This document contains information on the capabilities that are supported on printer hardware from Zebra/Eltron. Supports user-defined fonts and graphics including custom logos, ZPL II drawing commands for boxes and lines

#Zebra gx430t change font code#

Linear Barcodes: Codabar, Code 11(ZPL), Code 128, Code 39, Code 93, Code 93, EAN-13, EAN- 8, EAN-14(ZPL), GermanPost Code(EPL), Industrial 2-of-5 (ZPL), Interleaved 2-of-5, Japanese Postnet(EPL), ISBT-128(ZPL), Logmars(ZPL), MSI, Plessey, Postnet, GS1 DataBar(RSS-14), Standard 2-of-5(ZPL), UCC/EAN-128(EPL), UPC and EAN 2 or 5 digit extensions(ZPL), UPC-A, UPC-A and UPC-E with EAN 2 or 5 digit extensions, UPC-E, and GS1 Databar (RSS)Дў-Dimensional: Codablock (ZPL), Code 49 (ZPL), Data Matrix, MaxiCode, QR Code, PDF417, MicroPDF417, Aztec - For EPL and ZPL except where noted ZPL: 16 resident expandable ZPLII bitmap fonts, one resident scalable ZPL fontД«arcode Ratios: 2:1 (non-rotated) and 3:1 Native open type font support, Unicodeв„ў compliant for multi-language, on-demand thermal printing

#Zebra gx430t change font serial#

Serial RS-232, USB V1.1, Parallel, ZebraNet 10/100 Ethernet (optional) 802.11b/g wireless (optional), Bluetooth wireless (optional) Wireless options include LCD for visual communication